Radio Shack 6-IN-ONE TOUCHSCREEN REMOTE - Manual (Page 12)

QUICK START GUIDE (CONTINUED)
• I F YOUR DEVICE DOES NOT RESPOND , FOLLOW STEPS 1 THROUGH 6 WITH
EACH CODE LISTED FOR YOUR BRAND . I F NONE OF THE CODES LISTED FOR
YOUR BRAND OPERATE YOUR DEVICE , THEN TRY “S EARCH M ETHOD ” ON
PAGE 12.
• S OME CODES ARE QUITE SIMILAR . I F YOUR DEVICE DOES NOT RESPOND
OR IS NOT FUNCTIONING PROPERLY WITH ONE OF THE CODES , TRY
ANOTHER CODE LISTED UNDER YOUR BRAND .
• I F THE ORIGINAL REMOTE CONTROL DID NOT HAVE A POWER KEY ,
PRESS PLAY INSTEAD OF POWER DURING STEP 5.
• W RITE YOUR CODE IN THE BOXES PROVIDED ON PAGE 26, FOR QUICK ,
EASY REFERENCE .
S EARCH M ETHOD
If your device does not respond to the remote
after trying all codes listed for your brand, try
manually searching for your code. The Search
Method allows you to find the code for your
device by scanning through all the codes con-
tained in the memory of the remote. The Search
Method may also work if your brand is not listed
at all.
T O SEARCH FOR YOUR TV CODE :
1. Switch your Television on (not on standby).
2. Press TV.
3. Aim the remote at your television. Hold down P
for at least 3 seconds. The bottom of the IR
Indicator blinks twice, and a circle appears
around P.
4. Press 9 9 1. The bottom part of the IR Indicator
blinks twice.
5. Press POWER. If the TV turns off, you have
found your code. If not, press the TV key to
cycle to the next code, and press POWER again.
Repeat this process until you find the code that
turns off your TV. You may have to repeat this
sequence many times so please be patient.
Remember to keep pointing the remote at your
television while pressing these keys.
6. When your television switches off, press P to
store the code.
Now your remote is ready to control your
television.
12 Quick Start Guide
6-
IN
-O
NE
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 12