Rangemaster DELUXE U109360 - 01 - Manual (Page 12)

12
Main Oven shelves
the shelf guard should be at the back pointing upwards
As well as the flat shelf some models are supplied
with a drop shelf. The drop shelf increases the
possibilities for oven shelf spacing.
The oven shelves can be easily removed and refitted.
Pull the shelf forward
until the back of the shelf
is stopped by the shelf
stop bumps in the oven
sides.
Lift up the front of the
shelf so the back of the
shelf will pass under the
shelf stop and then pull
the shelf forward.
To refit the shelf, line up the shelf with a groove in the
oven side and push the shelf back until the ends hit
the shelf stop. Lift up the front so the shelf ends clear
the shelf stops, and then lower the front so that the
shelf is level and push it fully back.
The Handyrack
The maximum weight that can be held by the
Handyrack is 5.5kg (12lb). It should only be used with
the supplied meat tin, which is designed to fit the
Handyrack. Any other vessel could be unstable.
The Handyrack fits to the left hand Main Oven door
only. Food cooking on it is easy to attend to, because
it’s accessible when the door is open. It can be fitted
at two different heights. One of the oven shelves
must be removed and the other positioned to suit.
When the Handyrack is used in its highest position,
other dishes can be cooked on the bottom shelf
position of the oven or standing on the base of the
oven
When the Handyrack is used in its lowest position,
other dishes can be cooked on the second shelf
position of the oven or standing on the base of the
oven.
To fit the Handyrack,
locate one side of it
on the door bracket.
Then spring the
other side out to
clip it onto the
other bracket.