Roberts Radio RD-20 User Manual

Page 8

Finding new stations - DAB

As time passes new stations may become available. To find new stations
proceed as follows:-

1. Press and release the AutoTune button, the display will show

Autotune Quick scan. Your radio will perform a scan of the UK DAB
frequencies. As new stations are found the station counter on the
right-hand side of the display will increase and stations will be added
to the list

2. To carry out a full scan of the entire DAB band III frequencies press

and hold down the AutoTune button for more than 2 seconds and
then release. The display will show Autotune Full scan. As new
stations are found the station counter on the right-hand side of the
display will increase and stations will be added to the list

Autoselect - DAB

As an alternative to pressing the Select button to select a station your
radio can be set so as to automatically select a station.

1. Rotate the Tuning control a few clicks in either direction, immedi-

ately press and hold down the Select button until the display shows
Autoselect ON.

2. Rotate the Tuning control or press the Up or Down buttons until the

station you require is visible on the display. After a few seconds your
radio will automatically select the station shown on the display.

3. To switch off autoselect rotate the Tuning control a few clicks in

either direction, immediately press and hold down the Select button
until the display shows Autoselect OFF.

RD20 Issue 2.pmd

1/25/2007, 9:53 AM