Ryobi VC180 - Manual (Page 10)

10
OPERATION
ADDING ATTACHMENTS
See Figures 10, 11 and 12.
The brush attachment, crevice tool and squeegee attach-
ment have been provided with your hand vac. These at-
tachments can be easily snapped into place on your hand
vac.
Follow these steps to add attachments.
■ Turn off the vacuum.
■ Insert attachment into front end of vacuum, snap-
ping it into place.
WARNING:
The use of attachments or accessories not listed
can be hazardous.
Fig. 10
Fig. 11
CREVICE TOOL
BRUSH ATTACHMENT
TO INSTALL
TO REMOVE
TO INSTALL
TO REMOVE
Fig. 12
SQUEEGEE ATTACHMENT
TO INSTALL
TO REMOVE
FULL LINE INDICATOR
See Figure 9.
The full line icon shown on the dust bowl of your hand vac
should be used as an indicator when vacuuming liquids.
This full line indicates the maximum level for liquids within
the dust bowl. The hand vac should never be filled past
the full line; empty the dust bowl often to avoid this situa-
tion.
Do not tilt the hand vac with liquids in the dust bowl.
Never use the hand vac to pick up flammable or combus-
tible liquids such as gasoline; the motor could ignite.
Fig. 9
FULL LINE INDICATOR
ACCESSORIES