Radio Shack 200 - Manual (Page 14)

14
Follow these steps to install batteries and pro-
gram the system.
Note: When replacing the batteries, if you do not
install the new ones within 1 minute, the system’s
date and time will be lost (the Caller ID informa-
tion, however, stays stored in the system’s mem-
ory).
1. If you are replacing the batteries, unplug
both modular line cords from the back of the
system.
2. Use a Phillips screwdriver to remove the bat-
tery compartment screw on the bottom of the
system, then slide the cover off in the direc-
tion of the arrow on the cover’s door.
43-985.fm Page 14 Monday, August 16, 1999 5:08 PM