Radio Shack CID-944 - Manual (Page 4)

4
If your phone company sends information indicating that the incom-
ing call is long distance,
appears.
REVIEWING CALL RECORDS
Each time you receive a call, the CID saves a call record that you
can see while you are on the phone or review later. Each record in-
cludes the time and date of the call, the order in which it was re-
ceived, and the caller's telephone number and name (if available).
To scroll through the records, repeatedly press REVIEW
8 8 8 8
or
9 9 9 9
.
Notes:
• If no call information is stored, NO CALLS appears when you
press REVIEW
8 8 8 8
or
9 9 9 9
.
• If you do not press a button within 20 seconds, the CID auto-
matically returns to the time and date display.
• After you review all calls, -END OF LIST- appears. Press
either REVIEW key to view the calls again.
DISPLAYED CALL INFORMATION
DELETING CALLS
Deleting a Single Call
Note: This procedure does not delete VIP and message waiting call
records. See “VIP Call List” on Page 5.
1. Repeatedly press either REVIEW key until you see the call
record you want to delete.
2. Press DELETE twice. The CID deletes that record and automati-
cally renumbers the remaining call records. After 20 seconds,
the time and date reappear.
Deleting All Calls
To delete all Caller ID records, wait until the CID shows the time and
date, then hold down
DELETE for about 4 seconds. ERASE ALL…
flashes, then the CID beeps and the time and date reappear.
USING CALLBACK
When the CID displays a phone number you want to dial, press
CALLBACK to automatically dial it. DIALING... and the phone
number appear. After the CID dials the number, PICKUP PHONE
appears.
To complete the call, pick up the phone within 4 seconds after you
see
PICKUP PHONE . If you do not pick up the phone within 4 sec-
onds, PICKUP PHONE disappears and the CID does not complete
the call.
To redial a number, press REVIEW
8 8 8 8
or
9 9 9 9
to select the number,
then pick up the handset and press CALLBACK to dial it.
Notes:
• If the phone number's area code matches the area code you
stored, press CALLBACK twice to dial the ten-digit number (area
code plus the phone number). If you need to dial 8-digit number
(1 plus the phone number) or 11-digit number (1 plus the area
code plus the phone number), just pick up the handset and dial
1 then press
CALLBACK .
• If the phone number’s area code does not match the area code
you stored, the CID automatically dials 1 and the entire phone
number. To set the CID so it does not dial 1 before dialing the
phone number (for that call only), press
CALLBACK twice.
• If you did not store an area code after installing the AC power,
the CID displays SET AREA CODE 000 , and the first 0 flashes.
See “Connecting Power and Setting Up the CID” on Page 2 to
store the area code. Then press
CALLBACK to dial the number.
Calling the Last Dialed Number
To quickly call the phone number in the last call record you dialed,
press
CALLBACK while the time and date appear.
The CID displays DIALING... while it dials the number, then
PICKUP PHONE . To complete the call, pick up the phone within 4
seconds after PICKUP PHONE appears.
Display (English,
French, Spanish)
Description
NEW CALL# XX
(all languages)
Appears as new calls are received.
XX is the number of new calls.
Appears if a new call comes in while
you are using the phone. The NEW
CALL indicator flashes.
-PRIVATE CALL- ,
APPEL PERSONNEL ,
LLAMADA PRIVADA
The caller has blocked Caller ID
information from being sent.
-END OF LIST- ,
-FIN DE LIST- , -
FIN DE LISTA-
You have reached the end of your
call records. Press either
REVIEW
key to see them again.
-OUT OF AREA- ,
-HORS ZONE- ,
-FUERA DE AREA-
The caller is not within a Caller ID
service area. No caller information
appears.
-ERROR- ,
-ERREUR- ,
-ERROR-
Appears if the Caller ID information
is garbled, or if there was an error
during the transmission of Caller ID
information.
NO CALLS , AUCUN
APPELS , NO LLAMA-
DAS
There are no call records in the
CID's memory.
A message is waiting (if you sub-
scribe to your phone company's
message waiting service).
PICKUP PHONE ,
DECROCHEZ , LEVAN-
TAR TEL
Appears after the CID dials a num-
ber when you press
CALLBACK (see
“Using Callback” on Page 4).
SET AREA CODE ,
CHOISIR ZONE ,
CODIGO DE AREA
Prompts you to set the area code
(see “Connecting Power and Setting
Up the CID” on Page 2).
Appears when you review a Caller ID
record from someone who has called
more than once from the same num-
ber.