ROWENTA GARMENT STEAMER - Manual (Page 6)

Accessories
(depending on model)
Before using any of the accessories on upholstery or garments, be sure to
consult the manufacturer’s labels regarding their recommendations for
garment care. We also recommend testing on an unobtrusive area.
Upholstery brush*
The upholstery brush is used to aid steam penetration into
difficult or heavy fabrics for faster results.
• Attach the upholstery brush to the steam head by lining up
the bottom of the brush with the bottom of the steam head.
Gently push the top of the brush into place on the steam
head until it clicks into place.
• Gently brush the area to be steamed with the grain or nap
of the fabric.
• Remove the upholstery brush once unit is unplugged and completely
cool. Remove it by pressing on the tab on top of brush while pulling it
forward.
Fabric brush*
The fabric brush opens weave of the fabrics for better steam penetration.
• Attach the fabric brush to the steam head by lining up the bottom of the
brush with the bottom of the steam head. Gently push the top of the
brush into place on the steam head until it clicks into place.
• Gently brush the area to be steamed with the grain or nap of the fabric.
• Remove the fabric brush once unit is unplugged and completely cool by
pressing on the release tab on top of brush while pulling it forward.
Reminder: When using accessories steam only in an up and down
vertical motion. Never use the steam head in a horizontal position
and never steam with your steam head upside down.
Be sure unit is unplugged and completely cool before attaching
accessories.
*depending on model: this is either equipment specific to certain models or available as
an optional accessory.
Warning: Never steam clothes while they are being worn. Hose
and steam head will become hot during use.This is normal. Use
caution and avoid prolonged contact.
6
Be sure unit is unplugged and completely cool before attaching
accessories.
Never touch the steam head until it cools completely.