Rosewill RC-415 - Manual (Page 5)

USER’S Manual
Stations Connection
Connect each station to the switch by twisted-pair cable. Plug one
RJ-45 connector into a RJ-45 port of the switch, and plug the other
RJ-45 connector into the station’s network adapter. Power on the
switch and then system is ready.
For cable selection, refer to the following table.
Switches Connection
In making a switch interconnection, you could use any port to
connect another switch with straight or crossover cable. As all the
ports support auto MDI / MDI-X function, using a straight cable to
make a switch-to-switch connection is allowed.
For cable selection, refer to the following table
4
Network Speed Cable Type Max.Length
10Mbps
100Mbps
1000Mbps
Cat. 3, 4, 5 UTP/STP
Cat. 5 UTP/STP
Cat. 5 UTP/STP
100 meters
100 meters
100 meters
SWITCH RC-415/416