beautypg.com

Rheem Marathon CMR50245 User Manual

Marathon, C191.1 csa energy efficiency

background image

Your Marathon is warranted not to leak for as long as you own your home*…

The Marathon offers this no-leak promise because of its superior, non-metallic PermaGuard
tank construction…A seamless blow molded polybutylene inner tank with a filament wound
fiberglass outer tank for maximum strength. Superior performance, high-efficiency and low
operating cost…for a lifetime*!

*See Residential Warranty Information Brochure at your dealer for complete warranty information.

A

C

5-3/4"

B

TANK CAPACITY

ROUGHING IN DIMENSIONS (SHOWN IN INCHES)

SHIPPING WEIGHT

ELEMENT

TANK

HEIGHT TO

IMPERIAL

WATTAGE

HEIGHT

WATER CONN.

DIAMETER

MODEL NUMBER

GALLONS

LITRES

@ 240 VOLTS

AMPERAGE

A

B

C

LBS.

KG

CMR50245

40

180

4500/4500

18.75

62-3/4

66-3/4

23-1/2

103

46.7

CMR75245

60

270

4500/4500

18.75

58-1/2

62-1/2

28-1/4

127

57.6

MARATHON

Residential Electric Water Heaters

Available in 40 and 60 Imperial Gallon Electric Models

Lifetime Limited Tank Warranty* 5 Year Limited Parts Warranty*

The seamless, blow-molded, polybutylene

tank is impervious to rust and corrosion

Multiple layers of filament wound fiberglass
give the tank unmatched strength

The tank is designed, built and warranted

not to leak “for as long as you own your
home”

Envirofoam insulation is free of ozone
depleting CFC’s and HCFC’s so it saves
the planet and it saves energy

Pipe wrap energy kit included to reduce
heat loss from plumbing lines

Recessed drain valve is out of the way of
brooms and scrubbers

Tough molded outer shell resists dents and

scratches

Factory installed temperature and pressure
relief valve for greater value and security

Conduit between control boxes facilitates
wiring for “off-peak” use

All plastic tank eliminates the need for an
anode rod – preventing potential odor
problems

C191.1 CSA Energy Efficiency

*See Residential Warranty Information Brochure for

complete warranty information.

Rheem Manufacturing Company • Water Heater Division
Rheem Canada Ltd.
,128 Barton Street West, Hamilton, Ontario L8N 3P3
Customer Service

1-800-268-6966

Warranty

1-800-263-8342

F O R M N O . 1 0 1 - 4 2 C A N 0 3 / 0 4 W P

In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.

EST. 1947

RHEEM

CANADA

LTD/LTÉE

THANKS TO OUR EMPLOYEES

WE ARE

ISO9002

REGISTERED

CONSTRUCTION FEATURES

1. Energy Saving Pipe Wrap Kit – reduces heat loss through plumbing

lines.

2. Temperature and Pressure Relief Valve – factory installed.

3. Water Tight Grommets – keep out overhead moisture and condensation.

4. Seamless Molded Non-metallic Inner Tank – can’t rust or corrode.

5. Fill Tube – high temperature material to withstand thermal storage and

other high temperature applications.

6. High-tech Heating Elements – upper element fused to protect tank

against “dry fire”. Bottom element low watt, stainless steel for long life.

7. Polyethylene Outer Jacket – resists dents and scratches during transit,

installation and beyond.

8. Envirofoam™ – a great energy saver and friendly to the ozone layer.

It’s made without CFC’s and HCFC’s.

9. Fiberglass Tank – has unmatched strength.

10. Recessed Drain Valve – protected from damage.