Roberts Radio RD-41 - Manual (Page 7)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Using the AC adaptor
1. Place your radio on a fl at surface and insert the adaptor plug into
the DC socket located on the left side of your radio. The adpator
for use with your RD-41 should provide 9 volts DC output at 1.2
amps, centre pin positive.
2. Plug the adaptor into a standard 13 amp mains socket outlet.
Whenever the adaptor is used the batteries are automatically
disconnected.
We would recommend for economy that your radio is used via the
AC adaptor whenever possible with battery operation for occasional
use only.
IMPORTANT: The mains adaptor is used as the means of connecting
the radio to the mains supply. The mains socket used for the radio
must remain accessible during normal use. In order to disconnect
the radio from the mains completely, the mains adaptor should be
removed from the mains socket outlet completely.
6