Roberts Radio CR9976 - Manual (Page 16)

15
Programmed play
By programming the player you can play up to 20 tracks in any desired
order.
1. Whilst the CD is in STOP mode, press the Memory/TIME ZONE
button. The display will show ‘ P 01’.
2. Select the first track using the UP/F.skip or Down/B.skip buttons.
The track number will flash on the display. Store this track by
pressing the Memory/TIME ZONE button.
3. Repeat the above steps until you have completed your program.
Press the Play/Pause button to commence play of the selected
tracks.
Note: the display will revert to showing time after a few seconds of
inactivity.
Checking a programme
1. Whilst the CD is in STOP mode, repeatedly press the Memory/TIME
ZONE button to step through the tracks programmed.
Erasing a programme
1. Press the Memory/TIME ZONE button until the Memory indi-
cator flashes.
2. Press the Stop button to erase the programme. Programmes are
also erased by opening the CD door and interrupting the mains
supply.
2
2
2
1
1
1
2 3
cr9976 instruction book.PMD 3/16/2004, 1:17 PM 16