RCA RMW1108 - Manual (Page 9)

8
SIGNALS DURING OVEN SETTINGS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry, check and try again.
S
ETTING THE CLOCK
1. Touch CLOCK pad.
2. Use the number pads to enter the correct
time.
3. Touch CLOCK pad again.
NOTE:
·This is a 12 hour clock. When the oven is first
plugged in or when power resumes after a power
interruption, the display will show ENTER CLOCK
TIME. If you prefer not to have the clock displayed,
touch RESET.
S ETTING THE OVER TIMER
1. Touch TIMER.
2. Enter the amount of time by touching the
number pads.
3. Touch START/STOP.
NOTE:
·The maximum time you can enter is 99 minutes
and 99 seconds.
·Time countdown can be seen in display for 5
seconds before clock or cooking time is returned
to display.
·Touch TIMER and then touch RESET to cancel
TIMER during timing process.
S ETTING A COOKING PROGRAM
A. One-stage Cooking
1. Use the number pads to set a cooking time.
You can set a cooking time from one second
to 99 minutes and 99 seconds.
2. If you want to set a power level other than
100% power, touch POWER, then Use the
number pads to enter the power level.
3. Touch START/STOP to start cooking.
Use single digits to set a cooking power level:
Number pad Cooking power
1、0 100%
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
0 0%
B. Two-stage Cooking
Some recipes require different stages of
cooking at different temperatures.
1. SET STAGE 1:
Follow steps 1 and 2 in “One-stage Cooking”. DO
NOT TOUCH START/STOP
2. SET STAGE 2:
Touch COOK then enter proper cooking time and
(lower) power level. (Most 2-stage recipes use
lower power for second stage.)
3. Touch START/STOP.
NOTE:
· After total time elapsed, the system will sound
beeps with END in display. And the beeps will
continue to sound every two minutes
automatically until the door is opened or any
pad is touched.
O O P P E E R R A A T T I I O O N N I I N N S S T T R R U U C C T T I I O O N N S S