Rosewill RC-400 - Manual (Page 6)

Gigabit PCI Card RC400-LX User Manual
6
this card has not been inserted into the PCI slot correctly. Please insert
the card firmly into the PCI slot or try another slot.
How to deal with an exclamation point on Ethernet Host controller
1. Please shutdown your computer and move the card to another
available slot then re-install Gigabit Ethernet PCI Card driver again.
2. Please point on this device then right-check on the mouse.
3. This exclamation point usually means there is a resource conflict
between the Gigabit Ethernet PCI Card and another card in your
system. Please move the card to another available slot. Restart your
computer. Windows will then re-configure itself and re-assign
resources. Check your device manager again. If the exclamation point
is still there then repeat the process until it no longer appears.
I can not use Gigabit Ethernet transfer speed
1. Please affirm your Ethernet environment supporting Gigabit structure.
2. Please use CAT6 UTP/STP cable.
How to configure 10/100/1000Mbps Ethernet structure
Connect 10/100/1000Mbps Ethernet over unshielded twisted pair (UTP)
cable. Gigabit Ethernet PCI card has the ability of automatic sensing and
operating on either speed without manual reconfiguration.
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com for complete warranty information and future
support for your product.