Troubleshooting, Specifications – RBH Sound TK Series User Manual
Page 6
No sound from
speakers
No sound from
one speaker
Very little bass
and/or imaging
Speaker wire not connected
Speaker selector on amplifier
is not on
Balance control on receiver
or pre-amp is not centered
Speaker wire not securely
connected
Speakers are wired out of
phase
Make sure wire is connected
at both the speaker and the
amplifier observing proper
polarity
Activate proper selector on
amplifier
Place balance control in the
center
Check all connections at
amplifier and speakers
Check entire system for
proper polarity and make
adjustments as necessary
Troubleshooting
Probable Cause:
Solution:
Situation:
Model
TK-5CT
TK-515C
TK-5C
Frequency
Response:
45Hz – 20Hz
60Hz – 20Hz
60Hz – 20Hz
Sensitivity:
87dB
89dB
86dB
Power
Handling:
150 Watts
120 Watts
100 Watts
Woofer:
8” Kraft Pulp Woofer
Dual 5¼” Fiberglass
Mid-Range Woofers
Dual 5¼” Fiberglass
Mid-Range Woofers
5¼” Fiberglass
Mid-Range Woofer
Tweeter:
1” Fabric Dome Tweeter
1” Fabric Dome
Tweeter
1” Fabric Dome
Tweeter
Impedance:
8 Ohms
8 Ohms
8 Ohms
Crossover
Frequencies:
120Hz / 3000 Hz
3000 Hz
3000 Hz
Dimensions:
Height: 42.5”
Width: 11”
Depth: 13¼”
Height: 7¼”
Width: 20¾”
Depth: 8½”
Height: 12¾”
Width: 7¼”
Depth: 8½”
Finish:
Black or Rosewood with
gloss black top/side
accents
Black or Rosewood
with gloss black
top/side accents
Black or Rosewood
with gloss black
top/side accents
Weight:
40
17
11
Specifications
1
8
1
8