Radio Shack PRO-28 - Manual (Page 20)

20
OPERATION
TURNING ON THE SCANNER AND SETTING
SQUELCH
1. Turn SQUELCH fully clockwise.
2. Turn VOLUME/OFF clockwise until it clicks. The scanner automati-
cally scans the 30 channels.
Note: The first time you turn on the scanner, the channels might
not have any frequencies stored in them, but the scanner will con-
tinuously scan the empty channels.
3. Press MANUAL to stop the scanning. The display shows the cur-
rent channel.
4. Turn VOLUME/OFF clockwise to set the scanner’s volume about
half way.