Operating your radio fm – Roberts Radio R9941 User Manual

Page 8

Operating your radio FM

1. Switch on your radio by sliding the On/Off/DBB switch to the ‘On

‘position..

2. Slide the Waveband switch to the ‘FM’ position.

3. Adjust the Volume control until a sound is heard.

4. Rotate the Tuning control to select the desired station. On FM

the Tuning scale is marked in Megahertz (MHz).

5. For FM reception fully extend the Earphone lead and position for

best reception. When using the built in loudspeaker plug the Pig
tail aerial into the headphone socket as described on page 5.

6. If the station being received is weak some hiss may be audible, to

reduce the hiss slide the Stereo/Mono/Speaker switch to the ‘Mono
position’.

Note: FM stereo is only available when using earphone/headphones

7. To increase bass frequencies slide the On/Off/DBB switch to the

‘DBB’ position .

8. To switch off your radio slide the On/Off/DBB switch to the ‘Off’

position.