Getting started – Rosen Entertainment Systems M10 User Manual
Page 6

To Watch a DVD (if connected to a DVD Player):
1 Press
SOURCE
until “
DVD
” is displayed. If the screen is dark,
and you are using a Rosen M10-compatible DVD Player,
press the
POWER
button on the remote to turn on the DVD.
2 Most DVD discs begin playback automatically. If a menu
appears, press
PLAY
or
ENTER
as instructed on screen
(compatible Rosen DVD players only).
To Watch Broadcast Television
(with optional TV tuner):
1 Press
SOURCE
until “TV Tuner “ appears on the screen. If the
screen remains dark, press the
POWER
button on the remote.
2 To change channels, press
UP CH
and
DOWN CH
on the
remote (compatible Rosen TV Tuners only).
Use the monitor with the vehicle running, or with the ignition
key switch in the “accessory” position. The M10 can be
installed as a standalone monitor or as the control center for
a multiple-screen system. If installed with a compatible
Rosen source unit, the M10 remote control can operate basic
functions of that source unit. For this reason, many M10
control buttons will only operate if an optional source unit is
installed.
To Lower the Screen and Switch On the System:
GETTING STARTED
Note: The DVD controls on the M10 remote control and front panel
are compatible only with certain Rosen DVD players. Other players
may be connected to the display, but will not be controlled by the
remote or front panel buttons.
ENTER
OPEN
SOURCE
Press the OPEN button on the front panel or on the remote.
The screen will deploy, and the system will turn on.