RCA DUAL CASSETTE DUBBING DECK SCT-550 - Manual (Page 8)

8
DUBBING A CASSETTE TAPE
1. Insert a prerecorded cassette tape into DECK 1 , and a
blank tape for recording into DECK 2 to dub a tape on one
side.
2. Press DUBBING .
The RECORD and DUBBING indicators light, and both
PLAY direction indicators
/ of DECK 2 flash.
3. Press PLAY or to select the direction of the
cassette tape for DECK 2 .
The indicators in the selected buttons stop blinking and
the other indicators turn off.
The indicator of DECK 1 lights.
4. Press the STOP button on DECK 2 to stop dubbing.
Both decks stop.
Note: If the original tape was recorded using Dolby NR, the
copy also has Dolby NR, regardless of the position of the
DOLBY NR switch. If the tape you copy does not have Dolby
NR, you cannot add it to the tape you record.
Changing a Cassette Tape in DECK 1 During
Dubbing
If you press STOP on DECK 1 during dubbing, DECK 1 stops
and DECK 2 records 4 seconds of blank tape then goes into the
pause mode. During this time, you can change the cassette tape
in
DECK 1 . Press then press the PLAY button
of DECK 1 to resume dubbing.
AUTO DUBBING A CASSETTE TAPE
It is convenient to use this function when dubbing an entire
cassette tape from the beginning.
1. Insert a prerecorded cassette tape into DECK 1 and a
blank tape for recording into DECK 2 .
2. Press AUTO DUB .
The cassette tapes of DECK 1 and DECK 2 rewind
automatically to the beginning after you press AUTO DUB .
When rewinding is complete, Auto Dubbing begins.
One side of a cassette tape is recorded from the beginning
to the end automatically regardless of the mode.
HI-SPEED DUBBING A CASSETTE TAPE
1. Insert a prerecorded cassette tape into DECK 1 and a
blank tape for recording into DECK 2 .
2. Press HI-SPEED .
3. Press DUBBING .
4. Press PLAY or to select the direction of the
cassette tape for DECK 2 .
The indicators in the selected buttons stop blinking and
the other indicators turn off.
5. Press STOP on DECK 2 to stop dubbing.
Both decks stop.
RECORD
REC/
PAUSE