Playing a tape, Using an external microphone – Radio Shack MICRO-33 User Manual
Page 14
14
Operation
Using an External Microphone
You can use an external microphone to
make high-quality recordings. Plug a mi-
crophone with a
3
/
32
-inch plug into the re-
corder’s
MIC
jack.
Note: You can use a unidirectional micro-
phone with your recorder (not supplied,
available at your local RadioShack store).
PLAYING A TAPE
1. Load the microcassette tape.
2. Set
SPEED
to the speed used when
the tape was recorded.
3. To listen to the tape at normal speed,
set the function switch to
OFF
.
To listen to the tape at about 30% faster
than normal, set the function switch to
F-PLAY
(fast play).
4. Press
PLAY.
5. Adjust
VOL/VOX
to a comfortable lis-
tening level.
6. Press
STOP/EJECT
to stop playback.
Note: To play the other side of the tape,
unload the tape, turn it over, and reload it.
14-1045reimage.fm Page 14 Friday, January 12, 2001 3:56 PM