Roberts Radio FM RDS/DAB Digital Radio RD-50 User Manual

Page 5

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Battery operation

1. Release the catch securing the rear door of your radio.

2. Insert four LR20 (D size) batteries into the spaces in the compart-

ment. Take care to ensure all batteries are inserted with the correct
polarity as shown inside the battery compartment. Close the rear
door and secure the catch.

3. Reduced power, distortion and a ‘stuttering’ sound are all signs that

the batteries may need replacing.

4. If the radio is not to be used for any extended period of time it is

recommended that the batteries are removed from the radio.

We would recommend for economy that the RD-50 is used via the
AC adaptor whenever possible with battery operation for occasional
or stand-by use only.

Using the AC adaptor

1. Insert the adaptor plug into the DC in socket on the rear of your radio.

2. Plug the adaptor into a standard 13A mains socket outlet. Whenever

the adaptor is used the batteries are automatically disconnected.

The AC adaptor should be disconnected from the mains supply and
the radio when not in use.

rd-50 rr version instruction book.pmd

6/3/2005, 9:18 AM