Roberts Radio Gemini 21 RD-21 User Manual

Page 10

Finding new stations - DAB

As time passes new stations may become available. To ﬁnd new stations

proceed as follows:-

1. Press and release the AutoTune button, the display will show "Scan-

ning". Your radio will perform a scan of the UK DAB frequencies. As

new stations are found the station counter on the right-hand side of

the display will increase and stations will be added to the list

2. To carry out a full scan of the entire DAB band (band III) press and

hold down the AutoTune button for more than 2 seconds and then

release. The display will show "Scanning". As new stations are found

the station counter on the right-hand side of the display will increase

and stations will be added to the list

Signal strength display - DAB

1. Press and release the Select button to switch between the current

information display and the signal strength indication.

2. Position your radio and carefully angle the telescopic aerial for best

reception using the signal strength display as a guide. Move your radio

around and position so as to give maximum number of black rectangles

on signal strength display. The clear unﬁlled rectangle indicates the

minimum signal level required for satisfactory reception.