Rosewill RHUB-200 - Manual (Page 3)

USB 2.0 4 PORT HUB RHUB200 User Manual
3
System Requirement
z Pentium II 300MHZ(or higher) including USB 1.1 or USB 2.0 Port
z Windows 98Se/Windows 2000/Windows Me/Windows XP/
z Mac OS X
z Above CD ROM 24x
Attention
1. Please don't sun the USB 2.0 HUB. Please don't keep the USB 2.0 HUB neighboring the
electronics which is running with high current
2. Please don't disassemble and repair the USB 2.0 HUB. Keep contacting the retailer in
case of assistance is needed
Hardware Connection Guide
1. Please plug USB cable connector A to USB port on Laptop/PC first
2. The USB 2.0 HUB will work well after you followed above connection guide(Please use
AC Power(5V/2A) for extra power supply, if you are running USB devices which are high
power consumption devices)
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com for complete warranty information and future support for your product.