Main menu, Input source, Aspect ratio – Runco VX-33I User Manual
Page 63: Pre l iminar y
Runco VX-33i Installation/Operation Manual
47
PRE
L
IMINAR
Y
Main Menu
The Main Menu is the starting point for accessing all projector functions.
(The Calibration and Service menus are hidden and not accessible until you enter a
passcode.)
Input Source
From the Main Menu, select Input Source to choose a video signal source.
The active source is indicated by an arrow (>) to its left; in this example, Composite is the
active source.
Aspect Ratio
To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio
from the Main Menu and press ENTER or SELECT. Select the appropriate aspect ratio
for your screen size and the type of program material being viewed; refer to Table 4-1.
The currently-selected aspect ratio is indicated by a “
7
” to its left; in this example, 16:9 is
selected.
Runco Video
Input Source
>
Composite
S-Video
Component RCA (HD1)
Component BNC (HD2)
Component PC (HD3)
RGB RCA (HD1)
RGB BNC (HD2)
RGB PC (HD3)
HDMI 1
HDMI 2
Aspect Ratio
7
16:9
4:3
Letterbox
VirtualWide
Cinema
Virtual Cinema
The aspect ratio selection is automatically saved for each input and
resolution.
Note