Rosewill RC605 - Manual (Page 2)

2 Port eSATA II Express Card RC605 User Manual
Features and Benefits
z Fully compliant with ExpressCard Specification 1.0
z ExpressCard/34 Form Factor Module
z Serial ATA generation 2 transfer rate of 3.0Gbps
z Adds two eSATA (external Serial ATA) ports
z Supports Native Command Queuing (NCQ), Non-zero offsets NCQ, and Out-of-order data delivery NCQ
z Supports Hot Plugging on Extend Serial ATA port
Package Contents
z 1 x eSATA II 300 2-Port ExpressCard
z 1 x Driver CD
z 1 x User Manual
System Requirements
z Windows® 2000 /XP 32/64 /Server 2003, Vista 32/64, Linux, Mac OS X
z ExpressCard-enabled system with an available ExpressCard slot
Hardware Description
Hardware Installation
General instructions for installing the card are provided below. Since the design of system may vary, refer to your system’s reference
manual for further information, if needed.
Insert the Card into the ExpressCard slot of your system. Make sure it is inserted all the way in for a solid connection.
Driver Installation
For Windows® XP/Server 2003
For New Installation
A new installation requires a floppy disk for the driver installation. To make this floppy disk, copy the contents of the
“ExpressCard\2-SATA\SATA” folder, found on the driver CD, onto a blank floppy disk then follow the directions below.