Rival COOL ZONE CZF630 User Manual
Page 8
WARNING: Always turn control to OFF then disconnect plug from wall
outlet BEFORE disconnecting SureRELEASE
TM
CORD.
CAUTION:
•
Do not immerse the cord set in water or any other liquids.
•
Do not attempt to defeat the detachable magnetic SureRELEASE™
Cord system by trying to permanently attach cord set to product.
•
Do not stick pins or other sharp objects in holes on magnetic cord set.
•
Do not use any type of steel wool to clean magnetic contacts.
NOTE: Make sure the fryer has cooled completely before cleaning.
1. Turn unit OFF.
2. Unplug from outlet and allow unit to cool completely.
3. Remove SureRELEASE™ magnetic cord from the fryer
socket.
4. Remove the Lid. (See Fig. 2)
5. Open the Filter Cover and remove the Filters.
6. Remove Frying Basket.
7. Lift Control Panel up from the front of the fryer.
8. When unit has cooled completely carefully lift the Oil Reservoir straight
up and out by holding the rim of the Oil Reservoir. If you plan to reuse
the oil, reference TIPS FOR OIL USE AND STORAGE on
page 11.
WARNING: Do not remove Oil Reservoir until the unit
has cooled completely and is unplugged.
9. Remove Power Strip from the back of the fryer. (See Fig. 3)
10. Remove Condensation Trap.
NOTE: This trap will collect any water that has been
condensed on the inside of the Lid when the Lid is
opened after frying. Remember to empty and clean the Condensation
Trap after each use. To clean simply rinse with warm water and dry.
-8-
Figure 3
Figure 2
CARE AND CLEANING