Radio Shack PRO-63 - Manual (Page 20)

20
BASIC OPERATION
TURNING ON THE SCANNER AND
SETTING SQUELCH
Note: Make sure the scanner’s antenna is connected before you
turn it on.
1. Turn SQUELCH MIN/MAX fully counterclockwise.
2. Turn VOLUME OFF/MAX clockwise until it clicks and you hear
a hissing sound.
3. Turn SQUELCH MIN/MAX clockwise, then leave it set to a
point just after the hissing sound stops.
The scanner automatically starts scanning channels. Press MAN-
UAL to stop scanning.
Note: If you have not stored frequencies into any channels (see
“Searching For and Storing Active Frequencies” on Page 21), the
scanner does not scan.
O F F M A X MI N M A X
VO L U ME SQUEL CH
O F F M A X MI N M A X
VO L U ME SQUEL CH
20-561.fm Page 20 Wednesday, August 4, 1999 3:48 PM