Night Owl Optics LION-4250 - Manual

LION-4250 QUICK SET-UP GUIDE
NIGHT OWL CUSTOMER SERVICE AND TECHNICAL SUPPORT TOLL FREE: 1.866.390.1303 EMAIL AT [email protected] 24/7 PRODUCT SUPPORT AT WWW.NIGHTOWLSP.COM/SUPPORT
Package Contents
Step 1: Connect the DVR to your TV:
1. Connect the BNC-RCA (RCA SIDE ONLY) cable to an open Input
on your TV (note the input name or number)
2. Connect the other end of the BNC-RCA (BNC SIDE ONLY) cable to the
back of the DVR labeled “Video Output”
3. Turn on your TV and select the appropriate input (noted above)
Step 2: Connecting your Mouse and Ethernet Cable
1. Connect the USB mouse to the open top USB slot on the back of your DVR.
Note: Please ensure the mouse is installed on the top USB slot only.
2. Connect the Ethernet cable to the back of the DVR labeled either RJ-45 or LAN
3. Connect the other end of the cable directly to your router, modem or
high speed internet connection input.
Note: Please consult the networking section of your manual to configure the DVR
for remote viewing.
Step 3: Connecting the Cameras / DVR
1. Connect the 60ft camera cables to the cameras (make sure you connect the
cable end labeled “To Camera Only”)
2. Connect the other end of the 60ft camera cables (BNC) to the back of the DVR
(make sure you connect the cable end labeled “To DVR Only”)
a. Connect each camera to an open Video Input on the back of the DVR
3. Connect the 4-way camera power splitter to the cameras
4. Connect the 4-way camera power splitter to the Camera Power Adapter and
Plug in to an open outlet*
5. Connect the DVR power supply to the back of the DVR labeled DC and the
plug to an open outlet.*
* Notice: We strongly suggest that you plug your DVR and Camera power supplies
into a Transient Voltage Surge Protector or UPS (Uninterruptable Power Supply).
Use a clamping rating of 330 or lower, Joule rating of at least 400 and a response
time of 10 nanoseconds or less. If you have no idea what this means just use a
power strip.
Once you power up the DVR and turn your TV on to the correct input you will see
the DVR powering on eventually being able to view all 4 cameras.
Step 4: Using your DVR
Please consult the supplied instruction manual to learn about the wonderful features
of your Night Owl Security Kit.
1x Remote Control (Batteries ncluded)
1x Mouse
1x 4-Way Camera Splitter
1x 4 Channel H.264 DVR with 500GB HD 1x Video Output Cable (BNC to RCA)
1x Camera Power Adapter
4x 60 Feet of Camera Cable
4x Cameras with Stands and
Mounting Hardware
1x Quick Set-Up Guide
1x Driver CD
1x DVR Power Adapter 1x RJ-45 Cable
(Ethernet)
1x User Manual
1
2
3
4
(Router / Modem)
(RCA) (BNC)
Use (To Camera Only) end of Cable
Use (To DVR Only)
end of Cable
Camera Splitter
Camera Adapter
DVR Adapter
MO DEL #
CO PYR IGH T ® 200 9 N IGH T O WL
LIO N45 00
ww w.N ight Ow lSP. com
NIG HT OW L
INS TRU CTI ON
MA NU AL
4 CH ANN EL H. 264 VIDE O SE CUR ITY K IT
WIT H 4 NIG HT VIS ION CA ME RAS
1x Installation Card