General setup – Nextar X3-01 User Manual

Page 15

CALIBRATE

Tap

in the settings menu to enter CALIBRATE menu for calibrating the sensitivity

of the unit, the screen will display as below:

Tap the center of “+” as it moves around the screen. If you touch the center of “+” every

time, it will disappear and tap the screen to return to the settings menu.

Note: If “+” doesn’t disappear, you should calibrate again.

MASTER VOLUME

Tap

in the settings menu to enter VOLUME settings menu for master volume

adjusting, as shown below:

Tap the

buttons to adjust the master volume. Then tap

to confirm or tap

to cancel.

Note: there are two levels of volume control: one is the master control in the general

set-up; the secondary volume control is in the navigation or mp3.

General Setup