Nortel Networks Passport 8002PS - Manual (Page 9)

5
6. Attach the grounding cable to the system or
rack ground for your DC input power source. 7. Firmly slide the power supply all the way
into the bay and tighten the retaining screws.
9428FA
8. Attach the positive and negative terminal
leads to the DC input power source
according to the proper safety and technical
specifications for your 48-volt power
distribution system. 9. Turn the DC input power source on, or reset
the power source circuit breaker, to provide
power to the power supply.
10. Turn the power supply switch to the
on position.
9429FA