NorthStar Navigation VHF Marine Radio Explorer 721US - Manual (Page 22)

22 Northstar Explorer VHF Series: 721US, 721EU Operation and Installation Manual
RADIO SETUP
> CH NAME
RING VOLUME
KEY BEEP
EDIT CH NAME
TELEPHONE
CH NAME
01
TELEPHONE
SAVE CH NAME
PHONE1
> YES
NO
TELEPHONE
> EDIT
DELETE
3-3 Change Channel Names (CH NAME)
The channel charts are listed in Appendix C with their default name tags. CH NAME gives you the option
to edit or delete the channel name tags displayed on the screen.
1. Select RADIO SETUP, then CH NAME.
2. Use CH + or CH - to step through the channels with their names until you see the channel name you
want to change, then press ENT or push the rotary knob. In this example, the channel name TELEPHONE
associated with channel 01 is being changed to PHONE1.
3. Select EDIT and press ENT or push the rotary knob to edit the existing name tag. Enter the new name
over the existing name. It can be a maximum of 12 characters.
To delete the channel name, just select DELETE then press ENT or push the rotary knob.
4. Press ENT or push the rotary knob (repeatedly if necessary) to display the YES/NO confi rmation.
5. Press ENT or push the rotary knob to confi rm the new channel name tag or the deletion, then press
ESC to return to the menu.
3-4 Ring and Beep Volume (RING VOLUME) and (KEY BEEP)
Set the volume level of the incoming signal beeps (RING VOLUME) and/or the error and warning beeps (KEY
BEEP) as follows:
1. Select RADIO SETUP, then RING VOLUME or KEY BEEP as appropriate.
2. Select a HIGH or LOW volume. (You can turn the beeps off completely by selecting KEY BEEP then
OFF.)
3. Press ENT or push the rotary knob to confi rm the new volume setting and return to the menu.
3-5 Internal Speaker Connections (INT SPEAKER)
Switch the radio’s internal speaker ON or OFF. (The external speaker is always ON if a speaker is plugged into
the external speaker jack.)
1. Select RADIO SETUP, then INT SPEAKER.
2. Select ON or OFF then press ENT or push the
rotary knob to confi rm the setting and return
to the menu.
RADIO SETUP
> CH NAME
RING VOLUME
KEY BEEP
RING VOLUME
> HIGH
LOW
KEY BEEP
> HIGH
LOW
OFF
RADIO SETUP
RING VOLUME
KEY BEEP
> INT SPEAKER
INT SPEAKER
> ON
OFF