Nady Systems PMX-420 - Manual (Page 2)

Congratulations on your choice of the NADY AUDIO PMX-420
powered console mixer — you have purchased one of the finest
powered mixing units on the market today. This unit was
developed using the expertise of professional sound engineers
and working musicians. You will find that your new PMX-420
powered mixer has superior performance and greater flexibility
than any other powered mixer in its price range. Please read this
manual carefully to get the most out of your new unit. Thanks for
selecting NADY AUDIO as your choice in powered mixers
2
PMX-420
6 Channel Powered Console Mixer
Date of Purchase
Dealer’s Name
City
State
Zip
Model #
Serial #
C O N T E N T S
FEATURES ................................................................................2
WARNING ..................................................................................3
INSTALLATION ..........................................................................4
1. Inspection ..............................................................................4
2. Setup and Operation ............................................................4
CONTROLS AND CONNECTIONS ............................................5
1. Channel Section ....................................................................5
2. Master and Effects Section ....................................................6
3. Master Input / Output Section ................................................7
4. Rear Panel..............................................................................8
CONNECTIONS ........................................................................9
BLOCK DIAGRAM ....................................................................10
SPECIFICATIONS ....................................................................11
• This amazingly compact 6-channel powered mixer can pump
out 420W RMS, complete with Echo Effects and Submixes,
while capable of handling 11 total inputs simultaneously!
• 2 Mono channels each with balanced XLR Mic and 1/4" TRS
line inputs and 2 Stereo channels with input A or B selector
switch for each channel, Effects Return and Submix 1 & 2
Return with dedicated Volume/Pan for a total of 11
simultaneous inputs
• Power Output – 2 x 210W RMS @ 4 ohms (1% THD) with both
channels driven. Advanced amplifier design features include
fan cooling, short circuit protection, speaker DC protection
circuits, clip indicators for utmost safety and reliability and
power ON/OFF anti-thump circuit for quietest operation
• Stereo L-R Master Mix and S1-2 Group Submix buses, with 4
master faders and submix to main enable switch and Pan
controls
• Built-in Echo Effects 32-bit DSP emulates plate, gate, room,
hall, and stadium reverb
• Full complement of input controls, connections and indicators:
Channel Trim controls, Peak LED’s, High, Mid, and Low EQ’s;
Channel Submix assign and PFL buttons, EFF Send controls,
Pan and Volume controls
• Effects Send and Return with level control; 2 X 5-segment LED
display bargraph meters with L-R/S1-2/EFF and PFL selector
and Power Amp peak indicator
• Output insert jacks on all L-R and Submix outputs for adding
effects or compression before the amplifier
• Stereo headphone output with L-R/G1-2/PFL selector and
separate volume adjust
• Outputs include Line Level Left and Right, Submix 1-2, Low
Frequency output, and 1/4" Speaker outputs for Left and Right
• Internal shielded AC supply with 115V(60Hz)/230V(50Hz)
select switch
• Dimension & Weight: 4.5” x 11.4” x 12.3" (114 x 290 x
312mm); 18.8 lbs. (8.5 Kg)
F E AT U R E S