NAD T 571 - Manual (Page 9)

INTRODUCTION PAGE 9
Identification of Controls (Cont’d)
Rear Panel
12V
TRIGGER
IN
S-VIDEO OUT jack
VIDEO OUTPUT SELECT
switch
AUDIO OUT (L/R) jacks (1, 2)
VIDEO OUT jack 12V TRIGGER INPUT jack
By connecting this DVD player to another
NAD audio component or system controller
equipped with a 12V trigger output, you can
remotely operate the T 571 power ON/OFF.
COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks
POWER CORD
Connect to an AC 120V, 60Hz
outlet only.
COAXIAL DIGITAL
AUDIO OUT jack
OPTICAL DIGITAL AUDIO OUT jack
Remove the dust protection cap from the connector
and connect the optical digital cable (not supplied)
securely so that the configurations of both the cable
and the connector match. Keep the dust protection
cap and always reattach the cap when not using the
connector to protect against dust intrusion.
Dust protection cap