Eizo LA-030-W - Manual (Page 4)

3.
Attach the Attaching-monitor Part to the monitor.
(1) Attach the Attaching-monitor Part to the monitor with specific screws (4 points).
(2) Put in the arm covers to the shield plate with sliding them rightward or leftward.
(1) (2)
Arm covers
Mounting screws (4 pcs)
4.
Attach the monitor to the wall.
(1) Draw the Arm Part to on side.
Connect the concave portion of the Attaching-monitor Part (below figure A) to the salient of the Arm
Part (below figure B).
NOTE
Check the Attaching-monitor Part is connected firmly.
¯ {
Connect firmly
(2) Fix with the enclosed fixing screw.
(1) (2)
Fixing screw
A
Concave portion of the
Attaching-monitor Part
B
Salient of the Arm Part
Draw the arm
to the wall