NHT VT-2 - Manual (Page 5)

provide two sets). To bi-wire the VT-2’s, connect the top pair of binding posts to the amplifier with one speaker wire, and
the bottom pair with a second wire. The two sets of speaker wire are both connected to one pair of terminals on the
amplifier.
The Model VT-2 loudspeaker system is compatible with virtually all quality amplifiers. Proper wiring of the speakers is
essential to good sound. At a minimum, 14AWG wire is recommended for runs of 10 feet or less, with heavier special
purpose speaker wire used for longer runs. For specialty wire considerations, consult your local authorized NHT retailer.
For best results, use equal length runs of speaker wire for the left and right speakers. Prepare your speaker wire by
stripping 1/4” to 3/8” of insulation from the ends and twisting the exposed wire strands tightly. The five-way binding posts
on the back of the speaker will accept raw wire, banana plugs, or spade plugs. Tighten the binding posts by hand, as
pliers can strip or break them.
Be sure to wire both the left and right speakers "in-phase." That is, the Positive (red) terminal on the amplifier
output must be connected to the corresponding Positive (red) terminal on the speaker. Likewise with the Negative
(black) terminals. All speaker wires have some sort of marking along one or both conductors to help you make the
correct connections. Incorrect speaker phase is indicated by weak bass and the lack of a well-defined stereo image.
To minimize noise pickup, segregate cables by function. Do not run low level signal cables parallel to power cables,
speaker cables, or digital cables. Also, do not run speaker cables or digital cables parallel to power cords or parallel to
each other. If different types of cables are placed near each other at some place in your system, separate them by the
maximum practical distance and cross them at right angles where they meet. Do not twist or tie AC power cords with
speaker cables.
„ Operation
The Model VT-2 was designed to handle a wide range of listening levels, but every speaker has limits. It is important to
use common sense and listen for signs of possible distress from the speakers. Underpowered amplifiers are most often
the cause of speaker damage. For example, a 60-watt amplifier runs out of power when called upon to produce more than
60 watts, and the resulting distortion can damage the speaker. If you tend to listen at high volume levels, more powerful
amplifiers are preferable becase they are less likely to run out of power.
Noticeable distortion or harsh breakup is an indication that either your amplifier or your speakers are running beyond their
capacity, and the volume should be decreased. If you can feel any heat emanating from the woofer or tweeter, reduce the
level immediately. Speaker damage most often occurs from sustained high volume levels, not from transient sounds or
brief musical peaks. Excessive boosting of bass, treble or equalizer controls can worsen the problem, and is not
recommended.
„ Maintenance
Your speakers require minimal maintenance under normal use. The cabinet may be cleaned using a damp cloth or a mild,
non-abrasive cleaner. To clean the grille, first remove it from the speaker, then brush lightly with a soft brush or use a
vacuum on its lowest setting. Do not expose the speakers to direct sunlight, high temperatures, or moisture. Do not
attempt to clean the actual drivers.
5
Warranty
Valid Only in the U.S.A.
Warranty Period
For the period of 5 years for parts and 5 years for labor from date of original purchase (the warranty period) from an authorized NHT dealer, Now Hear This (NHT) warrants that if our product fails to
function properly under normal use due to a manufacturing defect when installed and operated according to the owner’s manual instructions enclosed with the unit, it will be repaired or replaced with
a unit of comparable value at the option of NHT without charge to you for parts or actual repair work. Parts supplied under this warranty may be new or rebuilt at the option of NHT.
What’s Not Covered
This warranty does not cover any product which is used in any trade or business, or in an industrial or commercial application.
This warranty does not cover the cabinet or any appearance item, or any damage caused to the product resulting from: alterations, modifications not authorized in writing by NHT, accident, misuse or
abuse, damage due to lightning or power surges, or being subjected to power in excess of the speaker’s published power rating.
This warranty does not cover the cost of parts which would otherwise be provided without charge under this warranty, obtained from any source other than an authorized NHT service location. This
warranty does not cover defects or damage caused by the use of unauthorized parts or labor or from improper maintenance.
Altered, defaced or removed serial numbers void this warranty.
Your Rights
The liability of NHT will be limited to the purchase price of the product, and NHT will not be liable for incidental or consequential damages. NHT limits its obligations under any implied warranties under
state laws to a period not exceeding the warranty period. Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of inci-
dental or consequential damages. The above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
To Obtain Service
NHT has appointed a number of authorized service companies throughout the USA should your product ever require service. To receive warranty service, you will need to present your sales receipt
showing place and date of original owner’s transaction.
To find the name and address of the nearest authorized NHT service location, call or write: Customer Service Department, Now Hear This, 6400 Goodyear Road, Benicia, CA 94510. 800-NHT-
9993.
Please do not return product to this address. It is not a service location.
Keep this warranty with your sales receipt.
Record date and place of purchase for future reference.