NEC FE991SB - Manual (Page 12)

1-12
10
Specifications
Monitor MultiSync ® FE 791SB Notes
Specifications Monitor
Picture Tube Diagonal: 17 inch 90 ° deflection, 0.25 mm grille pitch,
Viewable Image Size: 16 inch medium short persistence phosphor,
Radius: 50,000 mm aperture grille CRT, multi-layered,
anti-static screen coating, dark-tint screen
and OptiClear
® screen.
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Display Colors Analog input: Unlimited number of Colors Depends on display card used.
Synchronization Horizontal: 30 kHz to 96 kHz Automatically
Range Vertical: 50 Hz to 160 Hz Automatically
Resolutions Supported 640 x 480 @ 60 to 160 Hz Some systems may not support
Resolution based on horizontal and 800 x 600 @ 50 to 146 Hz all modes listed.
vertical frequencies only 832 x 624 @ 50 to 141 Hz
1024 x 768 @ 50 to 116 Hz ...................... NEC-Mitsubishi Electronics Display cites
1152 x 870 @ 50 to 103 Hz
recommended resolution at 85 Hz for
1280 x 1024 @ 50 to 89 Hz optimal display performance.
1600 x 1200 @ 50 to 76 Hz
Active Display Area Horizontal: 315 mm/12.4 inches Dependent upon signal timing used,
(Factory Setting) Vertical: 236 mm/9.3 inches and does not include border area.
Active Display Area 325 mm/12.8 inches Dependent upon signal timing used,
(Full Scan) 244 mm/9.6 inches and does not include border area.
Power Supply AC 100 – 240 V, 50-60 Hz
Current Rating 1.9A @ 100-240 V
Dimensions 397 mm (W) x 392 mm (H) x 415.5 mm (D)
15.6 inches (W) x 15.4 inches (H) x 16.4 inches (D)
Weight 17.2 kg
37.9 lbs
Environmental Considerations
Operating Temperature: +5 °C to +35°C / +50°F to +90°F
Humidity: 10% to 90%
Feet: 0 to 10,000 Feet
Storage Temperature: -20 °C to +60°C / -4°F to +140°F
Humidity: 10% to 90%
Feet: 0 to 50,000 Feet
NOTE: Technical specifications are subject to change without notice.