Niles Audio RVL-6 - Manual (Page 27)

Programming Learning Remote Controls and IntelliPads
• Learning remotes and IntelliPads in the system are taught the Niles RVL-6 IR commands for ON, OFF, ALL
ON, ALL OFF, VOLUME UP and VOLUME DOWN. The VOLUME UP and VOLUME DOWN IR commands
of the RVL-6 replace those of the stereo receiver. Specific programming instructions are covered in the
Operation section (see page 19).
Routing Global Commands
• The ALL ON and ALL OFF commands that affect the entire system are routed by connecting together all RVL-6
UART connectors (see Figure 32 ).
27
Controls DATA IN
to DEDICATED FLASHER Controls DATA IN
to Room 1 control module
Figure 31 DATA IN route enables
Figure 32 UART connections.