Nostalgia Electrics Cocktail Cyclone CSS-500 - Manual

COCKTAIL CYCLONE™
CSS-500 Series
Read these instructions before using this item.
Save These Instructions!
IMPORTANT PRECAUTIONS
Appliance Specifications: Operates on 2 AAA Batteries (Included)
A.
NEVER immerse the battery base in water.
B.
NEVER use a scouring pad on the COCKTAIL CYCLONE™.
C.
NEVER use an abrasive sponge or harsh cleaning products on the COCKTAIL
CYCLONE™
D.
NEVER use for anything other than what this item was intended.
E.
DO NOT place in dishwasher.
F.
Keep out of reach of children.
IMPORTANT SAFEGUARDS
Basic safety precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS before operating this
COCKTAIL CYCLONE.™
ƒ
To operate the COCKTAIL CYCLONE ™, the 2 AAA batteries (included) should be
inserted into the Stainless Steel bottom properly. (Matching + positive on battery to +
positive connection, and negative – on battery to negative – negative.
ƒ
Do not place hands or foreign objects into acrylic tumbler when mixing paddle is in
operation.
ƒ
The use of accessory attachments not recommended by the appliance manufacturer
may cause injuries.
ƒ
Always push the ON/OFF button on “OFF” before removing liquid from COCKTAIL
CYCLONE™.
ƒ
Do not place on or near a hot gas or electric burner, or in a heated oven.
ƒ
Before replacing batteries in your unit, make sure the battery size voltage corresponds
to that indicated.
ƒ
Do not use this appliance for other than intended use.
ƒ
DO NOT put in dishwasher.
HOW TO USE YOUR COCKTAIL CYCLONE™
We are confident you will enjoy using your COCKTAIL CYCLONE™ mixer. You can mix and
strain drinks like a professional bartender with this acrylic and Stainless Steel martini shaker.
The leak proof lid and cap allow you to turn on the cyclone without the mess.
1.
Fill the shaker with the ingredients and a small amount of ice for your favorite drink.
(NOTE: A LARGE AMOUNT OF ICE WILL IMPEDE THE MIXER.)
2. Place the Stainless Steel leak proof cap and suction lid onto the durable acrylic tumbler
making sure you have a snug and secure tight fit. Add the pour spout cap.
3.
Simply press the ON/OFF button to mix it up. Notice the cyclone mixing action as your
beverage quickly blends without the effort of shaking.
4.
In minutes, you can depress the soft touch ON/OFF button turning off your
cyclone mixer.
5.
Remove the cap and pour the contents into a glass through the easy pour spout. The
ice remains in the acrylic tumbler.
USE FOR:
ƒ Martini’s
ƒ Margaritas
ƒ
Mixed Drinks …and more!
HOW TO REPLACE BATTERIES
ƒ Tip the COCKTAIL CYCLONE™
over to view the removable rubber plug at the
bottom. Using a table knife or similar shaped
instrument, insert at any edge where the rubber
meets the Stainless Steel and gently pry open.
The plug should drop out.
ƒ Your COCKTAIL CYCLONE™ Is provided with
2 AAA batteries. To replace, simply remove the
batteries one by one and replace with new ones.
NOTE: the positive + printed on the battery
coincides with the positive+ marking on the cyclone. Thus, the negative – printed on the
battery coincides with the negative – marking on the cyclone.
ƒ Replace the plug (smooth side in), turning the cyclone as you press the edges in with
your thumb. When the plug is in correctly, your cyclone should sit level on a flat
surface.
Cleanup
ƒ The Stainless Steel leak proof cap and suction lid as well as the pour spout cap can be
submerged in hot sudsy water. Rinse and dry with soft non-abrasive cotton towel. DO
NOT place in dishwasher.
ƒ
Rinse out the durable acrylic tumbler with stainless steel bottom by carefully placing
under tap and rinse well. DO NOT submerge. Dry with a soft non-abrasive cotton towel
preparing your COCKTAIL CYCLONE™ for the next use.
Care and Maintenance
1. Never use a scouring pad or abrasive cleaner on your COCKTAIL CYCLONE™.
2. Always use a non-abrasive sponge or cloth to clean and dry your cyclone.
3. NEVER place in dishwasher.
C
A
B
BREAKDOWN EXHIBIT
A.
Durable Acrylic and Stainless Steel Tumbler
B. 2 AAA Batteries (Included) and tumbler plug
C. Stainless Steel Leak Proof Cap and Suction Lid