Nady Systems SRM-12K - Manual (Page 12)

S P E C I F I C AT I O N S
3. FREQUENCY RESPONSE
ANY INPUT TO
ANY OUTPUT ....................20 Hz to 20 KHz =/- 3dB @ 0 dBm
4. TOTAL HARMONIC DISTORTION
ANY INPUT TO
ANY OUTPUT ..............0.02%, 20 Hz-20 KHz @ 1Khz, 0 dBm
5. INPUT CHANNEL EQUALIZATION
High shelving ....................12 kHz, +/- 15 dB, Q fixed at 2 oct.
Mid bell ............................2.5 khZ, +/- 15 dB, Q fixed at 1 oct.
Low shelving ......................80 Hz, +/- 15 dB, Q fixed at 2 oct.
Low Cut (High Pass)
filter (Mono channels only)............75 Hz, -3 dB (18 dB/octave)
6. GAIN CONTROL RANGE
Mono input channel
trim control............................Stop to stop- Mic +10 dB~+60 dB
Channel/Master Faders ...................................... -
∞
to +15 dB
Aux Send ..............................................................Off to +15 dB
Aux Return ..............................................Off to Unity to +15 dB
7. CROSSTALK @ 1KHZ
ADJACENT CHANNEL INPUTS ......................-78 dB~-68 dB
INPUT TO OUTPUT .......................................... -78 dB~-68 dB
8. HUM AND NOISE
20 Hz-20 Khz, Rs=150 ohms, input TRIM @ 0 dB, input sensi-
tivity at –60 dB
EQUIVALENT INPUT NOISE ....................................-129 dBm
RESIDUAL OUTPUT NOISE........................................-85 dBm
9. VU METERS
10-segment LED X 2
10. PHANTOM POWER
+48 VDC, globally selected
11. POWER REQUIREMENTS
External PSU, 120 VAC/60Hz or 230 VAC/50Hz
12. POWER CONSUMPTION
25 Watts, External PSU
13. DIMENSIONS AND WEIGHT
SRM-12X: 13.5" x 11.5" x 3" (343 x 292 x 76 mm),
7.9 lbs (3.7 Kg)
SRM-14X: 13.5" x 13.5" x 3" (343 x 343 x 76 mm),
9.3 lbs (4.2 Kg)
External PSU not included
1. INPUT SECTION
Input Connector Input Impedance Nominal Level Max Level
MONO CH MIC XLR >1.3K
Ω
+2 dBm +14 dBm
MONO CH LINE 1/4" TRS >10K
Ω
+4 dBm +22 dBm
STEREO CH LINE 1/4" TRS >10K
Ω
+4 dBm +22 dBm
TAPE IN RCA PIN JACKS >10K
Ω
+2 dBm +22 dBm
AUX RETURNS 1/4" TS >10K
Ω
+4 dBm +22 dBm
INSERT IN 1/4" TRS >10K
Ω
+4 dBm +22 dBm
2. OUTPUT SECTION
Output Connector Output Impedance Nominal Level Max Level
STEREO OUT L/R XLR & 1/4" TS 120
Ω
+4~+6 dBm +22 dBm
AUX SENDS 1,2 1/4" TS 120
Ω
+4~+6 dBm +20 dBm
INSERT OUT 1/4" TRS 120
Ω
+4~+6 dBm +22 dBm
CNTRL R. OUT 1/4" TS 1K
Ω
+4~+6 dBm +22 dBm
REC OUT RCA PIN JACKS 1K
Ω
+4~+6 dBm +22 dBm
PHONES 1/4" TRS 200
Ω
––– 40mW X 2
12
The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit,
including design and appearance, are subject to change without prior notice.