5. adjustment lock, 6. connecting two pcs to the monitor – Eizo T965 User Manual
Page 19
![background image](/manuals/194213/19/background.png)
3. SCREEN ADJUSTMENT
19
ENGLISH
MD-C53A (Optional)
Apple Macintosh
(Blue & White)
Standard graphics board
Æ
3-5. Adjustment Lock
Use the “Adjustment Lock” function to prevent any accidental changes.
Locked function
• Adjustments and settings in the ScreenManager.
• AUTO/FINE MODE button.
Unlocked function
• Adjustment of contrast and brightness by the shortcut keys.
• BNC/D-Sub Selection button.
[To lock]
Press on the AUTO/FINE MODE button while switching on the monitor’s power.
[To unlock]
Switch off the monitor’s power, then hold down the AUTO/FINE MODE button
once again and turn the power back on.
3-6. Connecting two PCs to the Monitor
Two PCs can be connected to the monitor through the BNC/D-Sub input connections
on the back of the monitor.
(Example)
Selecting the active input
Every time the BNC/D-Sub selection button is pressed, the input changes in
order.
[Automatically selecting the priority input signal for screen]
The monitor will automatically detect the inputted signal of either the BNC or
D-SUB connection for display. In the following cases, the signal given
preference will be displayed automatically.
• When the monitor is turned on.
• Once a priority is selected in the function, whenever a
change of signal is detected at the selected input, the monitor will switch the
input to that signal.
(How to give priority to the input)
(1) Select in the
(2) Select
Saving the adjustment data
The adjustment data can be saved for both signals. However, the following
adjustment and setting data can be saved for each input signal (BNC/D-Sub).