Specifications - as171, Specifications, English – NEC AccuSync AS191 User Manual
Page 13
English
English-11
Specifications
Monitor Specifications
AccuSync AS171 Monitor
Notes
LCD Module
Diagonal:
43.2 cm/17.0 inches
Active matrix, thin film transistor (TFT)
Viewable Image Size:
43.2 cm/17.0 inches
liquid crystal display (LCD); 0.264 mm dot
Native Resolution (Pixel Count):
1280 x 1024
pitch; 250 cd/m
2
white luminance, 900:1
contrast ratio, typical.
Input Signal
15pin Mini D-sub:
Analog RGB
0.7 Vp-p/75 ohms
Sync
Separate sync. TTL level (Positive/Negative)
DVI-D
Digital RGB
DVI(HDCP)
Display Colors
Analog input:
16.7 M
Depends on display card used.
Viewing Angle
Left/Right:
-80°/+80° (CR>10)
Up/Down:
-80°/+80° (CR>10)
Synchronization Range
Horizontal:
31.5 kHz to 81.1 kHz
Automatically
Vertical:
56 Hz to 76 Hz
Automatically
Resolutions Supported
Landscape:
720 x 400*
1
: VGA text
Some systems may not support all
640 x 480*
1
at 60 Hz to 75 Hz
modes listed.
800 x 600*
1
at 56 Hz to 75 Hz
832 x 624*
1
at 75 Hz
1024 x 768*
1
at 60 Hz to 75 Hz
1152 x 864*
1
at 75 Hz
1152 x 870*
1
at 75 Hz
1280 x 960*
1
at 60 Hz to 75 Hz
Recommended resolution is 60 Hz for
1280 x 1024 at 60 Hz to 75 Hz.....................optimal display performance.
Active Display Area
Horizontal:
337.9 mm
Vertical:
270.3 mm
Power Supply
100 - 240 V ~ 50/60 Hz
Current Rating
0.5 - 0.3 A
Power
Maximun Operation:
22 W
Consumption
Normal Operation:
18 W
Dimensions
Landscape:
373.2 mm (W) x 373.1 mm (H) x 205.1 mm (D)
14.7 inches (W) x 14.7 inches (H) x 8.1 inches (D)
Weight
3.9 kg (8.6 lbs)
Environmental Considerations
Operating Temperature:
5°C to 35°C/41°F to 95°F
Humidity:
20% to 80%
Altitude:
0 to 2,000 m/0 to 6,562 Feet
Storage Temperature:
-10°C to 60°C/14°F to 140°F
Humidity:
10% to 85%
Altitude:
0 to 12,192 m/0 to 40,000 Feet
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE:
Technical specifications are subject to change without notice.