Network Technologies ST-C5KVM2ARS-1000S - Manual (Page 12)

NTI XTENDEX Extenders
9
Installing The Remote Unit
1. Position the Remote Unit such that the CAT5 cable, the monitor cable, device cables, and the AC
adapter power connector can each reach the Remote Unit without putting strain on the cables.
2. Connect the monitor cable to the female 15HD video connector on the Remote Unit.
3. Connect the device(s) to the Remote Unit (see Fig. 6)(KVM models only).
a. Connect the keyboard to the purple female 6 pin miniDIN connector on the Remote Unit.
b. Connect the mouse to the green female 6 pin miniDIN connector on the Remote Unit.
4. If the Remote Unit has RS232 support, connect the remote user's RS232 cable from a touch
screen monitor to the RJ45 port on the Remote Unit using the DB9M-to-RJ45 adapter and patch cable
provided.
5. If the Remote Unit has audio support, connect the cable from the remote speakers to the 3.5mm
stereo audio jack with the speaker symbol on the Remote Unit. (See Fig. 7) Connect a microphone
to the 3.5mm stereo audio jack with the microphone symbol on the Remote Unit.
Figure 6- Connect the extended components to the Remote Unit
Front View of
Remote Unit
Rear View of Remote Unit
VGA
Multi-Scan
Monitor
PS/2 KEYBOARD
PS/2 MOUSE
15HD Female
Video Connector
CAT5 Cable to
Local Unit
Remote User's Keyboard, Monitor, and Mouse
6 pin miniDIN
Female Connector
ST-C5KVMRS-1000S Remote Unit (Front and Rear View)
NTI
R
Network Technologies Inc
XTENDEX
Cat5 Patch Cable
(supplied)
DB9M-RJ45F Adapter
(supplied)