Nokia 9232254 - Manual (Page 10)

G e t s t a r t e d
10
When the battery is running out of power, the headset beeps. Charge the battery as
described above.
■ Pair the headset with a compatible phone
1. Make sure that the compatible phone is switched on and the headset is
charged.
2. Switch on the headset.
3. Activate the Bluetooth connection from the phone. For more information, see
the user guide of the phone.
4. Set the phone to search for Bluetooth devices as instructed in the user guide of
the phone.
5. Select the Nokia HS-4W from the list.
6. Enter the generic passcode 0000 to associate ("pair") and connect the headset
to the phone.
Once you have entered the passcode, the phone becomes the default phone for
the headset, if the headset has not been previously paired with another phone.
See ’Use the headset with several paired phones, ’ p. 16.
The headset beeps once and an active Bluetooth connection is displayed by a
blinking yellow indicator light. The headset should now appear in the phone
menu where you can view the Bluetooth devices that are currently paired with
the compatible phone.
7. Start using the headset (see p. 13).