Nuvo Music Port NV-MP - Manual (Page 7)

5
Figure 2: –Music Port Hardware Connections
III. Establishing Music Port in the I8G and E6G Configurator Software (Fig. 3)
The I8G and E6G Configurator Software is an optional setup tool for establishing
sources and zone control of the Grand Concerto and Essentia E6G Audio Distribution
Systems. The Source tab within the software allows each of the six available source
inputs to be established.
To establish desired inputs within the I8G and E6G Configurator, within the “Source”
tab of the Configurator, double click on an available source input 1-6. This will open a
“Source Select” window. There, you can establish a name for the Music Port sources
within the “Display Name” window (Note that unless you check the box “Always Use
Display Name (ignore name sent by NuVoNet Device)”, the Music Port will
automatically place a name in the Source menu. Create a three-character abbreviation
for each of the Music Port sources in the “Short Name” window. Scroll to NuVo as a
manufacturer and select NV-MP and double click. Repeat these steps for each of the
Music Port sources being established.
R
SYS ON
EXT. MUTE
3033118 C US
CONFORMS TO UL STD.6500 CERTIFIED TO CAN/CSA STD.E60065
NuVo Technologies Cincinnati Ohio USA FUSE:T5 A 120V 60Hz 500W
MODEL NV-I8DM SIX SOURCE EIGHT ZONE AUDIO DISTRIBUTION SYSTEM
www.nuvotechnologies.com
VARIABLE OUTPUT
FIXED OUTPUT
TIP=L
RING=R RS-232
CONNECT TO NV-I8X
USE NV-SLC1 CABLE
CONNECT TO NV-I8EZP1
USE NV-NC1 CABLE
USE CNLY WITH 250V FUSE ZONE 7&8
SYSTEM NETWORK DIGITAL LINK
PROGRAM 1 2 3 4 5 6
NuVoNet
POWER
Address
NuVoNet Source Address
MENU
OK
Jozef Kossovit
SIR SR 86 (P101)
Sirius Pops
3:09 PM
Hungaria