Remote operation, Surge protection, Set-up – NexxTech 4313385 User Manual
Page 4: Care/service and repair, Operating the system from a remote location, Remote turn on, Remote record new ogm, Room monitoring
REMOTE OPERATION
While you are away from your home or office, you can access your unit by
remote operation. Use a touch-tone phone to enter your remote operation
security code.
OPERATING THE SYSTEM FROM A REMOTE
LOCATION
To use your unit from a remote telephone, you must first enter a 3-digit remote
operation security code. The security code label is located on the bottom of
the unit.
1. Dial your phone number.
2. When your outgoing message is playing, enter your remote operation
security code.
3. Two beeps will confirm that the right code has been entered. Now select
one of the remote commands. If no key is pressed for 10 seconds, the
unit will hang up.
Press:
To:
1#
Playback new messages
2#
Playback all recorded messages
7#
Turn on/off the unit
8#
Re-record an OGM
(press 5# to stop recording)
9#
Record a memo
(press 5# to stop recording)
0#
Room monitoring
5#
Stop room monitoring
When you press 1# to playback new messages, or 2# to play all
messages, you can then press the following keys to get these remote
functions.
Press:
To:
3#
Delete current message
4#
Repeat previous messages
5#
Stop playback
6#
Skip current message
4. After all your messages have been played, you hear two short beeps. You
have 10 seconds to access the menu again, otherwise, the unit disconnects
automatically.
REMOTE TURN ON
If you forget to turn your unit on, you can phone in from a remote location and
turn it on automatically.
1. Call your telephone number.
2. The unit answers after 10 rings. You will hear an announcement ʻNo one is
available to take your call. After several beeps, enter your 3-digit security
code.
3. After the second beep, press 7# then hang up. Subsequent messages
will be recorded.
REMOTE RECORD NEW OGM
If you press 8# (to record new OGM):
1. When you hear a beep, begin recording your new OGM (up to 5 minutes).
2. When you have finished recording your new OGM, press 5# . The new
OGM will playback to you.
3. Hang up the telephone.
REMOTE RECORD MEMO
If you press 9# (to record memo):
1. When you hear a beep, begin recording your memo.
2. When you have finished recording your memo message, press 5# .
ROOM MONITORING
If you press 0# (to room monitoring):
1. The built-in microphone of your answering machine will be switched on
and you can them listen in on the room.
2. Every 30 seconds you will hear a beep. If you want to continue listening,
press 0# again within 10 seconds. Otherwise the unit will hang up.
3. To end room monitoring, hang up the telephone or press 5# if you want to
use other remote functions.
TO RETRIEVE MESSAGES WHEN RECORDING
MEMORY IS FULL
1. When the message capacity is full, the unit will answer your call after 10
rings and announces ʻMemory is fullʼ.
2. Enter your 3-digit security code.
3. Follow the remote message playback procedure. After all the messages
have been played back, delete ones or all of them to create more memory
space.
SURGE PROTECTION
Your answering system with Caller ID has built-in protection circuits to reduce
the risk of damage from surges in telephone line and power line current.
However, lightning striking the telephone or power lines can damage your
telephone.
Lightning damage is not common. Nevertheless, if you live in an area that has
severe electrical storms, we suggest that you unplug your phone when storms
approach to reduce the possibility of damage.
SET-UP
Your answering system with Caller ID connects directly to a modular telephone
line jack. If your telephone wiring does not have a modular jack, you can
update the wiring yourself using jacks and adapters, or have the telephone
company update the wiring for you.
Note: The CSA number of the jack to be installed is CA11C (or CA11W for a
wall plate jack).
If your home has specially wired alarm equipment connected to the telephone
line, be sure that installing the telephone does not disable your alarm
equipment. If you have questions about what will disable your alarm equipment,
contact your telephone company or a qualified installer.
CARE/SERVICE AND REPAIR
Keep your answering system with Caller ID dry; if it gets wet, wipe it dry
immediately. Use and store your answering system with Caller ID in room
temperature environments only. Handle your answering system with Caller ID
carefully; do not drop it. Keep your answering system with Caller ID away from
dust and dirt, and wipe it with a damp cloth occasionally to keep it looking
new.
Modifying or tampering with the telephoneʼs internal components can cause a
malfunction and might invalidate its warranty.
4
LIMITED WARRANTY
Who is Providing This Warranty?
•
Orbyx Electronics, LLC (“Orbyx"), as the distributor of this Nexxtech™ product (your
“Product”).
What Does This Warranty Cover?
•
This warranty covers defects in materials or workmanship in your Product under normal use
and conditions.
What is the Period of Coverage?
•
This warranty covers your Product for 12 months from the original purchase date.
Who Is Covered?
•
This warranty covers the original consumer purchaser. Coverage terminates if you sell or
otherwise transfer your Product.
What Will We Do To Correct Problems?
•
We will repair your Product or replace your Product with a new or reconditioned equivalent
product, at our option.
How Do You Get Service?
•
Call Orbyx TOLL FREE at 1-866-363-3059 for instructions for obtaining warranty service
from Orbyx’s authorized service providers.
•
Or, return your Product directly to the retail store from which you purchased the Product.
•
When you obtain service for your Product, you must provide a purchase receipt (or other
proof of the original purchase date) and a description of the defect(s).
What Does This Warranty Not Cover?
•
This warranty DOES NOT COVER:
•
damage due to misuse, abuse, alteration, unauthorized repair, or accident (such as
improper electrical current);
•
damage due to “acts of God” (such as lightning) or other contingencies beyond our control;
•
cosmetic damage;
•
externally generated static, signal reception or antenna problems not caused by your
Product; or batteries.
•
This warranty also DOES NOT COVER, and in no case will we be liable for, any incidental
damages (such as transportation costs to and from an authorized service provider, or loss of
time) or consequential damages (such as costs of repairing or replacing other property
which is damaged, including tapes, discs, speakers not included with your Product or other
accessories, or external electrical systems) resulting from the use of your Product. Some
states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
•
Defacing the serial number, or using your Product for commercial or institutional purposes,
voids this warranty.
Are There Other Warranties?
•
There are no express warranties other than those expressed herein. Neither the sales
personnel nor any other person is authorized to make any other warranties or to extend the
duration of any warranties.
•
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY (AN UNWRITTEN WARRANTY THAT A PRODUCT IS FIT FOR
ORDINARY USE), ARE LIMITED TO 90 DAYS. Some states do not allow limitations on
how long an implied warranty lasts, so the above limitation may not apply to you.
How Does State Law Apply?
•
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.