Device setting – NetComm NP3024 User Manual
Page 18
NetComm 16 or 24 port Gigabit Switch
YML711 Rev1
18
www.netcomm.com.au
T h e
symbol represents a new trap signal record, and will disappear after you review and
click on the event record.
Figure 8. Trap Information
Note:
In order to receive Trap information, the Switch has to be configured with
Trap IP and Trap Events in the Web browser. Refer to the Trap Setting
Menu for more information.
Add Item
:
To add a device to the Monitor List manually, enter the IP
Address of the device that you want to monitor.
Delete Item
:
To delete the device in the Monitor List.