Nokia SU-4 - Manual (Page 11)

Using the Nokia Image Frame
7
3 Using the Nokia Image Frame
• VIEWING THE IMAGES
If there is only one image in the Nokia Image Frame, it is displayed when
you switch on the power. If there is more than one image in the Nokia
Image Frame, you can set the Nokia Image Frame to show just one
image, or several images in rotation as a slide show.
SETTING NOKIA IMAGE FRAME TO SHOW ONE IMAGE:
1
Slide the three position switch to .
2 Press briefly or to scroll through the images and select the
image you want to view. If you press and hold or , the images
scroll automatically at 3-second intervals.
You can scroll through all the marked images. For more information
about marking the images, see “Editing the images” on page 7.
SETTING NOKIA IMAGE FRAME TO SHOW THE SLIDE SHOW:
•
Slide the three position switch to .
The Nokia Image Frame displays all the marked images in rotation so
that each image is shown for 30 seconds at a time. For more information
about marking the images, see “Editing the images” on page 7.
• EDITING THE IMAGES
When the power is switched on and the edit mode activated, you can
delete the images and mark the images you want for viewing.
DELETING IMAGES:
Remember to make backup copies of your images by, for example,
sending and saving them to another compatible device.
1 Slide the three position switch to .
2 Press briefly or until the Nokia Image Frame displays the
image you want to delete.
3 Press and hold and until the icon is displayed.