Navman FISH 4500/4600 - Manual (Page 22)

5 The Displays
Press DISP to show the Display menu. Use or
to select display tab, then select a particular
display using the or cursor keys.
The Display menu is summarized here and each
display is shown in the following sections.
Most displays have an Options menu so that
relevant features can be changed quickly.
5-1 Sonar display
To show the Sonar display, press
DISP and select Sonar Tab, se-
lect Sonar and press ENT.
This display scrolls from right
(most recent echoes) to left
(oldest echoes) at the selected
frequency (see section 3-2 Setup
> Sonar).
To change items, press MENU until the Options
menu is shown.
Gain is explained in
section 4-4 Gain.
Range is explained in
section 4-5 Range.
A-scope is explained
in section 5-5 Sonar
A-Scope display.
Data header
The data header can be selected on or off.
When selected, it is a customizable feature that
can be used to display up to 12 data items,
such as boat speed
or fuel used.
Data header, set up to show the
boat speed, water temp etc.
Depth line
Color bar
Depth (medium size digits)
Range
Bottom
Surface
Fish symbols with depth
Note: Refer to Section 3-2 Setup > Sonar, for information about
customizing features on the sonar displays.
The Display menu
Fuel data (section 5-6)
Water temperature and depth history and boat data (section 5-7)
Sonar display at a single or mixed frequency (section 5-1)
Sonar split display with 50 and 200 frequencies (section 5-4)
Sonar flat bottom trace in zoomed section (section 5-3)
Sonar split display with echo strength (section 5-5)
Sonar split display with zoomed section (section 5-2)
Product and wiring information (section 5-8)
FISH 4500/4600 Installation and Operation Manual 22 NAVMAN