NAD C340 User Manual

Page 7

TROUBLESHOOTING

NO SOUND

• Power AC lead unplugged or power not

switched on

• Tape 2 Monitor selected
• Mute on
• Rear Pre-out/Main-in amp links not

fitted

• Headphones inserted

• Check if AC lead is plugged in and

power switched on

• De-select Tape 2 Monitor mode
• Switch off Mute
• Fit links

• Disconnect headphones

Problem

Cause

Solution

NO SOUND ONE CHANNEL

• Balance control not centered
• Speaker not properly connected or

damaged

• Input lead disconnected or damaged

• Center Balance control
• Check connections and speakers

• Check leads and connections

WEAK BASS / DIFFUSE STEREO IMAGE

• Speakers wired out of phase

• Check connections to all speakers in

the system

REMOTE CONTROL HANDSET
NOT WORKING

• Batteries flat, or incorrectly inserted
• IR transmitter or receiver windows

obstructed

• IR receiver in direct sun or very bright

ambient light

• Check or replace batteries
• Remove obstruction
• Place unit away from direct sun, reduce

amount of ambient light