NEC N8406-022 User Manual

Page 55

Text mode
Original mode

(English)

With the ejector being open, firmly hold the
Switch Module and slowly pull out from the
Blade Enclosure.

IMPORTANT:

・

Install the Switch Module in the Blade Enclosure after the period of 30
seconds or longer has passed from removing it from the powered
Blade Enclosure.

・

If the Blade Enclosure is used with the Switch Module being
removed, install the Slot Cover to the empty slot and secure it with a
screw.

NOTE:

For the information how to install the Slot Cover, see the Blade

Enclosure User’s Guide.