Part six – display reading and what they mean, Readings you may see when unit is ac powered – Nighthawk KN-COPP-3 User Manual
Page 21

Part Six – Display Reading and What They Mean
Readings You May See When Unit is AC Powered
Display Shows
Alarm Sound
Unit Status
Recommended Action
Steady “Err”
“Chirp” every
Unit malfunctioning when
Call KIDDE Safety customer
and flashing dot
30 seconds
AC powered
service at 1-800-880-6788
Readings You May See When Unit is on Temporary Battery Backup
Display Shows
Alarm Sound
Unit Status
Recommended Action
Flashing dot
None
Normal battery-only operation –
Plug in to AC as soon as
unit will show reading only if it
possible to conserve battery
senses CO
Flashing dot and
“Chirp” every
Unit malfunctioning when
Call KIDDE Safety customer
“Err”
30 seconds
battery powered
service at 1-800-880-6788
Flashing dot
“Chirp” every
Very low battery –
Replace battery
30 seconds
unit will not respond to CO
Refer to Step 3 on page ii.
No display
Constant Alarm
Near dead battery or
Replace battery –
unit malfunction
If this does not fix condition,
Call KIDDE Safety customer
service at 1-800-880-6788
6-4
If at any time you test the alarm and it does not perform as described, have it replaced immediately.
810-1368 AC PP 12/99 8/24/00 2:06 PM Page 22